01
- Nominal Capacity
- 4,100 cubic feet (+ or - 3%)
02
- Compartments
- Single (1) compartment design
- Capacity & Structural Limits
03
- Recommended Working Capacity Range
- 170 to 190 US Tons. Due to material fluidization, pneumatic expansion ("fluffing"), and bulk density variances (e.g., standard Portland cement, lime, fly ash), the functional volumetric capacity typically fills within this range.
04
- Overloading Consequences
- Loading material in excess voids all warranties. Overloading subjects the landing gear, support structures, and internal reinforcement rings to extreme fatigue, risking unrecoverable metal deformation (shell buckling), weld fractures, or complete structural collapse.
- Tank Shell & Structural Engineering
05
- Shell Material
- 3/16" gauge steel reinforced with internal structural rings.
06
- ⚠️ Recommended Unit
- A 1/4" heavy-duty steel shell is recommended for Barite to handle extreme material density and pneumatic abrasion.
07
- Design Pressure
- 15 PSI operating pressure.
08
- Manholes
- One (1) 20" full-opening hatch strategically located at the dead center.
- Aeration & Discharge Specs
09
- Discharge Cones
- Six (6) 45-degree hoppers angled for high-density flowable powders.
10
- Aeration System
- Built using 30" cotton pad aeration systems rather than fluidizing rubber pads, which some operators prefer for maximum air distribution across dry cement and lime.
11
- Discharge Piping
- 5" Schedule 40 steel pipe outfitted with 6" butterfly valves at each individual hopper.
12
- Air Control lines
- 4" steel piping on the curbside, managed via a 4" main butterfly valve and dual 4" check valves.
13
- Blow-Down Infrastructure
- A dedicated 4" steel blow-down line situated at the rear of the silo.
14
- Fill Intake Lines
- Four (4) separate 4" steel fill lines (two positioned on the roadside and two on the curbside) for balanced manifold loading.
- Pressure & Safety Monitoring
15
- Gauges
- Dual system pressure gauges mounted on the roadside for operator-level visibility during pneumatic transfer cycles.